Bathroom Vanities
Stone Top Vanity
Cabinetry engineered for a heavy stone top and an undermount basin.
How it is built
How this configuration is put together
Stone tops hide a lot of problems until the basin is cut in and the drawers stop closing. We reinforce the top rails, allow for the stone thickness in the drawer depth, and set the basin cut-out back far enough that water does not run onto the fronts.
Included in the build
- Top rails reinforced for stone, not just for a laminate top
- Drawer depth calculated with the stone thickness deducted
- Basin cut-out position set to limit splash onto the fronts
- Matching wall panel option so the vanity reads as one unit
Where it suits
High-spec ensuites, boutique hotel bathrooms, prestige renovations.
Default specification
- Top rails
- Reinforced to carry stone and basin weight
- Stone allowance
- 20 mm or 40 mm drop-edge allowed for in drawer depth
- Basin setback
- Set back from the front edge to control splash
- Wall panel
- Matching stone return or timber panel option
- Finish
- Matt or gloss board, timber veneer, or painted
Defaults as we would specify them, adjustable to a project specification. Pricing is not published here — it is calculated from drawings and panel area.
The same configuration from other angles
Enquire
Ask about this configuration
Send the number of rooms, ceiling heights and site dimensions and we can come back with a costed scope.
Or email us at shangge798@gmail.com
Other configurations in this range